Determination of position coordinates of the new active CORS in Ghana

Abukari, Osman Mohammed; Acheampong, Akwasi Afrifa; Dadzie, Isaac; Osah, Samuel; Ayer, John

Determination of position coordinates of the new active CORS in Ghana

Files

document (1).pdf(4.2 MB)

Date

2022

Authors

Abukari, Osman Mohammed

Acheampong, Akwasi Afrifa

Dadzie, Isaac

Osah, Samuel

Ayer, John

Publisher

Journal of the Ghana Institution of Engineering

Abstract

Global Navigation Satellite System (GNSS) technologies provide services and applications in a wide range of areas, including survey and mapping, transportation, precision agriculture, urban planning, smart mobility and smart city management, to name a few. Most of these applications rely on real-time kinematic (RTK) technology, which is typically supported by a network of continuously operating reference stations (CORS). In order to improve GNSS applications in Ghana, eight new CORS were established by the Licensed Surveyors Association of Ghana (LiSAG) in 2019 known as LiSAGNet. Accurate and precise positions of the LiSAGNet are, however, very critical for GNSS applications. Thus, the aim of this study is to determine accurate three-dimensional (3D) coordinates of the LiSAGNet using Network-based and Precise Point Positioning (PPP) techniques based on the International Terrestrial Reference Frame (ITRF). Positions of the new CORS were computed from data for 11 consecutive days using gLAB software v5.4.1 in PPP mode and the Canadian Spatial Reference System PPP (CSRS-PPP) online services as a check. Position solutions from both gLAB and CSRS-PPP were compared, which yielded coordinates variability of 0.001 m, 0.003 m and 0.029 m in the northings (N), eastings (E) and up (U) directions respectively and were therefore accepted as the final coordinates of the LiSAGNet. Positions from the PPP and Network-based techniques were also compared to determine consistencies or otherwise in the coordinates of the LiSAGNet. The study concluded that positions of LiSAGNet showed more consistency when determined by Network-based technique than when determined by PPP technique.

Description

This is an article published in Journal of the Ghana Institution of Engineering (2022) 22 : 1; https://doi.org/10.56049/jghie.v22i1.25

Citation

Journal of the Ghana Institution of Engineering (2022) 22 : 1 ; https://doi.org/10.56049/jghie.v22i1.25

URI

https://doi.org/10.56049/jghie.v22i1.25
https://ir.knust.edu.gh/handle/123456789/15805

Collections

Articles

Full item page