DSpace
 

KNUSTSpace >
Theses / Dissertations >
College of Engineering >

Please use this identifier to cite or link to this item: http://hdl.handle.net/123456789/3714

Title: Identification, modelling, and adaptive control of an aluminium reduction cell
Authors: McKenna, Joan S.
Issue Date: 8-May-1991
Series/Report no.: 1832;
Abstract: The estimation of the alumina concentration in the bath of aluminium reduction cells is a difficult task due to harsh operating conditions within the cells, the complexity of the process, and noise corrupted data. Knowledge of the concentration could significantly improve production efficiency and could be used to enhance the feed control system. In this report, an alumina concentration estimator is developed for a 140 kA prebake aluminium reduction cell. The estimation programme uses experimentally determined models of alumina concentration as a function of time and ohmic resistance as a function of alumina concentration in an extended Kalman filter algorithm with a feedback variable of ohmic resistance. The estimator was tested successfully on simulated and measured cell data. It is shown how the estimator could be incorporated into a feed control algorithm and the control strategy is applied to real and simulated input data.
Description: A thesis submitted to the Board of Postgraduate Studies, Kwame Nkrumah University of Science and Technology, Kumasi, in partial fulfilment of the requirements for the award of the Degree of Master of Philosophy in Chemical Engineering, 1991
URI: http://hdl.handle.net/123456789/3714
Appears in Collections:College of Engineering

Files in This Item:

File Description SizeFormat
KNUST Library.pdf7.09 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback